KevinJConnell

Member Since: February 25, 2010

Country: United States

  • Product DEV-09474 | about 4 years ago

    In was able to get this to connect with my desktop, but no luck past that point. Looking at the Wiznet website tutorial, it looks as if their full kit comes with some additional software that would be very helpful; but the ROM-maker files shown on the tutorial are not available for download as far as I can see.
    Also you have to program the MCU with an Atmel ISP programmer and I was unsuccessful doing this with my cobbled up arrangement using the ISP port of my STK500. If fuses are set on the ‘128 there is no way to ISP program it– it must be high-voltage programmed. The tutorial mentions “unmounting” the '128 for this. This is not feasible with the tools available to me.
    Any ideas?

No public wish lists :(