pf

Member Since: March 1, 2010

Country: United States

  • Product DEV-09459 | about 4 years ago

    I was able to get the microP to initialize the file system by formating the microSD card first with FAT, previously it was formatted with FAT16.
    Unfortunately I can’t get to the point were the blue LED is flashing, just a flashing red LED. Not sure why it is haveing trouble communicating with the camera.

  • Product DEV-09459 | about 4 years ago

    I have been trying to get the JPEG trigger and camera to work but have not had any luck. I removed the microSD card holder and connected an SD card holder in its place via some jumper wires. I replaced the card holder because I want to use this with an EyeFi card which only comes in the SD size. When I power it up I get the solid red LED, failure to initialize the file system. I am certain that I have connected the SD card slot correctly to the microSD pads on the PWB. I have tried a 2G MicroSD card in an adaptor and a 4G SDHC card and nothing works. One other question, is the code already loaded on the microP or do I need to do this first?

No public wish lists :(