Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you


Member Since: March 16, 2010

Country: Sweden




  • Product BOB-00099 | about 3 years ago

    If anyone had the same problem as me I found the solution, hope it saves you some googling time :) I am also unsure if the problem is connected to the UNO or not which I am using.<br />
    <br />
    Two issues:<br />
    Besides having to switch connectors from RX(0) and TX(1) to using A4 and A5 to get a read, I couldn’t set the time with the commands provided, it would just randomly set the time. The TsomeNumbers.. did not work. The problem came with the code supplied in both the wiring example and in the bottom section of the Arduino tutorial.<br />
    <br />
    I found by using the less(more?) sophisticated code from glacialwanderer.com it works a treat. just remember to comment out the set time line when the time is set :)<br />
    <br />
    http://www.glacialwanderer.com/hobbyrobotics/?p=12<br />
    <br />
    Hope this helps!

No public wish lists :(