rbanerjee23

Member Since: March 22, 2010

Country: United States

  • Hey Kindof,
    If you read this, could you let me know what exactly you did to get good data off of this gyro. I am using an arduino pro mini
    I have hooked Vdd/Vref to an external power supply (not through the arduino), HP/PD/ST/Gnd to Ground. It does not matter if I read values off of 1x or 4x, the adc value just sits at 638 with no real change. Any thoughts?

  • Hey Kindof,
    If you read this, could you let me know what exactly you did to get good data off of this gyro. I am using an arduino pro mini
    I have hooked Vdd/Vref to an external power supply (not through the arduino), HP/PD/ST/Gnd to Ground. It does not matter if I read values off of 1x or 4x, the adc value just sits at 638 with no real change. Any thoughts?

No public wish lists :(