×

Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.

avatar

animan

Member Since: March 23, 2010

Country: United States

  • Power the ADPS9960 using 3.3V power from Uno. Connect two 1K resistors in series when you connect the SCL and SDA lines. No resistors should be needed on the INT line since it is an output from the ADPS9960.

  • Can someone recommend a DC power plug for this. I believe it is spec'd at 1.3mm center positive. Thanks.

No public wish lists :(