March 28, 2010
Tutorial - Beginning Embedded Electronics - 2
about 5 years ago
I can verify that the parallel port programmer works. Tips on building it yourself. The cable should not be too long and I had to remove the resistor at pin 11 of the DB25 connector. I downloaded the ISP programmer windows software to test it out. If you are using avrdude, the following command should work:
avrdude -p atmega8 -P lpt1 -c dapa
This tells avrdude to identify your device. By default, a virgin atmega8 should have its fuse bits set to run at 1Mhz. You could try adding the 16 Mhz crystals and .22 caps as well if things don’t work.
Will this work with a home made DAPA parallel port programmer as described in this link: http://www.arduino.cc/en/Hacking/ParallelProgrammer
No public wish lists :(
Forgot your password?
No account? Register one!