Member #128358

Member Since: April 5, 2010

Country: United States

  • Seems of OK quality.
    The included holding bracket for the hot air gun has two mounting screws on the body of the control unit. Very convenient!
    The moment I removed it from the box 4 white plastic bits fell off the back. I opened it up, and it appears that the mounting method for the PSU at the back of the device is broken. They are little plastic expanding rivets, and the heads broke off. As a result, the PSU was ‘floating’ around inside the case. I was able to replace the plastic clips with screws + standoff.

No public wish lists :(