Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #1284753

Member Since: February 24, 2018

Country: United States

  • This looks like a really interesting board so I purchased one on the Crowd Supply side back when it was announced. However, the Crowd Supply site states that the board will ship May 31, 2021 which has passed. Also, the last update on the Crowd Supply site was back in April. Is there an update on this board with regards to when it will ship?

    I sent an inquiry on the Crowd Supply site but did not get a response so I thought I would post here as well.



  • The example references: "This is just a renamed copy of Cypress code example CE218134."

    However I was not able to locate any Cypress example CE218134. There are examples listed as CE218133 or CE218135 but not CE218134.


  • After downloading and unzipping the PSoC 6 Pioneer Kit Software from the listed link, when I attempted to Build the BLE_To_RPi project in PSoC Creator 4.2, I received the following error:

    Dependency Generation... Cleanup... ERROR: Could not copy file C:\Program Files\Cypress\PDL\3.0.1\drivers\peripheral\efuse\cy_efuse.c to L:\Cypress\PSoC_6\Pioneer_IoT_Kit_Shield-master\Firmware\BLE_To_RPi\BLE_To_RPi.cydsn\Generated_Source\PSoC6\pdl\drivers\peripheral\efuse\cy_efuse.c; failed with message: Could not find a part of the path 'L:\Cypress\PSoC_6\Pioneer_IoT_Kit_Shield-master\Firmware\BLE_To_RPi\BLE_To_RPi.cydsn\Generated_Source\PSoC6\pdl\drivers\peripheral\efuse\cy_efuse.c'. ERROR: Failed while attempting to update project 'BLE_To_RPi': Could not find a part of the path 'L:\Cypress\PSoC_6\Pioneer_IoT_Kit_Shield-master\Firmware\BLE_To_RPi\BLE_To_RPi.cydsn\Generated_Source\PSoC6\pdl\drivers\peripheral\efuse\cy_efuse.c'. --------------- Build Failed: 02/24/2018 01:26:47 ---------------

    I just manually copied the 'efuse' folder to the project 'Generate Source" location and the project built without error..

No public wish lists :(