Member #128577

Member Since: April 6, 2010

Country: United States

  • Product LCD-09395 | about 2 years ago

    It seems like the MCLR function has been disabled through the config bits. No pullup to Vdd is installed. This makes it really irritating to work with this display. Programming an arduino with this hooked the HW serial port will screw up the display, and without the reset line you have to pull power. A simple solution would just be to wire the PICs MCLR pin to the Arduinos reset line, but this isn’t possible without the MCLR function obviously.

No public wish lists :(