Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you


Member Since: April 7, 2010

Country: United States

  • Product WRL-09841 | about 4 years ago

    Just received mine, and tested it. It works nicely.
    i just want to report on weird behavior: if the xbee module is plugged on the shield, and the shield set up to use Arduino’s UART (RX and TX pins, on digital pins 0 & 1), then I could not upload any sketch. Removing it solves the issue.
    Is it an expected feature? I can well imagine interferences with the XBee module, just want to make sure.

No public wish lists :(