Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you


Member Since: April 28, 2010

Country: United States

  • Product DEV-09217 | about 4 years ago

    actually its not 20nf caps, the best setup is to run 2 22pf caps from the crystal legs to ground, I read 20 nf somewhere and tried it, but it locked up the avr, fortunately when I found an accurate source of information and got the 22pf caps the avr and crystal were both still fine.
    in short, you need 2 22pf caps, 1 22uf electrolytic cap (radial lead, axial lead wont work…that means it has to have an positive and negative, cant be non-polarized) 16mhz crystal, 5 volt voltage regulator, and a 10nf cap.
    any questions see:
    ^I’ve done this it works perfect^

No public wish lists :(