Member Since: January 5, 2007

Country: United States

  • I fixed it. Look in the arduino code.

    The pins you will need to connect are: SEN - D5, RST - D4, SDIO - A4, SCLK - A5, in addition to your power and ground.

    I also removed the Pull-ups and the 2k resistors from the board.

  • Can this board, in theory, control CCFLs if powered by a suitably strong inverter?

  • I'd like to see one with a u.fl connector. That way it can be bulkhead mounted very easily, even mounted slightly away from the sides of the case.