tasiv

Member Since: May 6, 2010

Country: United States

  • Product DEV-09530 | about 3 years ago

    Actually, I have it up and running right now. What voltage are you using to power the logger? I was attempting to use 3.3, but when I increased it to 5, it started working.

  • Product DEV-09530 | about 3 years ago

    I’m not sure if mine is bad or not. I plug it into power, and the serial terminal receives a 1 repeated every second with a sdhc card plugged in. When I unplug the sdhc card, the character changes to the ‘n’ and when a character is typed into the terminal (putty) it changes to the ‘u’. I think I may have broken it, however, the fact that the output changes when I modify conditions makes me think that it is still functional.
    I have attempted to re-flash it using the command prompt utility, however no luck.
    any help?
    -Alex

  • Product WRL-09111 | about 4 years ago

    I was looking at the schematic, it appears that you’ll need a null adapter. I’ll get some tomorrow and let y'all know what I find out

No public wish lists :(