×

Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.

Member #138058

Member Since: June 12, 2010

Country: United States

  • I took a few photos of a method I use to make a joystick style for the switch. Note that the finished photo is out of order. Be sure to put the glue in the tube and hang the assembly with tube pointing down until the glue dries in order to prevent the glue from entering the switch. https://www.flickr.com/photos/156116715@N04/

  • A cap thingy that works well with this switch can be made from the insulation off #12 THHN wire which can be purchased from Lowe's possibly . It has a good tight fit. I strip off a piece about 7mm long and press it on the switch.

  • The insulation off #12 THHN wire works really well with a good tight fit.

No public wish lists :(