Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.

Member #138459

Member Since: June 15, 2010

Country: United States

  • http://www.colinbookman.com/2014/12/15/intel-edison-getting-started-2/

    Thank you for the guide. I did that without any problem the moment I unpacked the kit, but that is not enough at all - there is no way to do an update or anything practical with the firmware version that's flashed from the factory. So, apart from the fact that I can connect with the console and hook to the network, I could do nothing useful. I have on the way now a mini-breakout kit, but I am dissapointed the way Sparkfun dealt with this kit.

  • Am I missing something, or this "Starter kit" misses exactly what you need to start the device. I hope that I am wrong, but it doesn't look that there is any way to flash the Edison to a workable version. The kit I got doesn't support "configure_edison --version" command, neither "configure_edison --upgrade". Please provide some direction if I am missing something.

No public wish lists :(