×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

GigaDork

Member Since: January 19, 2007

Country: United States

  • Two notes: - The board appears to need substantial recovery time 10mS < tr < 100ms between it's issuing an 'X' for normal playback termination and it's being able to process further serial commands. - The lack of a poll-able playback status AND an unambiguous Stop Playback command makes this board very unattractive to use when reliability is a must. It is impossible to force a playback status of Stopped when the playback status becomes unknown, and it is tedious at best to track the playback status. Absolute tracking is impossible; say the micro gets reset and the trigger does not. This is a cure-able Achilles heel, please consider adding either a poll-able playback status or a unambiguous Stop command to the serial protocol.

No public wish lists :(