Member #138684

Member Since: June 17, 2010

Country: United States

  • Product LCD-00569 | about 2 years ago

    I just finished a board with the connection stated above, but I didn’t get the backlight going on the first test. What i found is that the connections stated above is wrong! on mine, VLED is pin marked 1. This means I ran 7 volts to the VCC on my first test! don’t know yet if display is busted. Going to test it now and I do really hope that it has survived. But first I haveto redo my board. :/

No public wish lists :(