Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.


Member Since: June 21, 2010

Country: Australia


Spoken Languages


Programming Languages



Sydney Uni




Electronics Enthusiast/Hobby.

  • This LCD is not working..it is black with only the backlight on. Wiring diagram followed as posted. When tested with an oscilloscope, the signals are being received by the board (so loose wires are not the issue). Is this a Faulty display or am I missing something. Only powered via MBED / USB connection. Emailed your customer service but received no reply after 3 days. Please advise.

  • Thanks Klone! Much appreciated. I bought the $2 Heat Sink Compound from here instead. However, this white goo is not drying. It has been wet for two weeks now. There must be something that I am missing. I will try wiping it off and replace with the brown paste. Trying to glue the TEC cooler to this Heat Sink & Fan.

  • Hi. I bought this and find it works well with the TEC. However I would NOT recommend using the thermal tape - you lose the conductivity. What is that brown paste that comes with it ???

No public wish lists :(