Bartvoordummies

Member Since: July 10, 2010

Country: United States

  • Tutorial - Beginning Embedded Electronics - 2 | about 4 years ago

    Great tutorials, and dito comments. They’ve made me able to let the LED blink, via USB and @ 16 MHz. As a next experiment I’ve recently tried to programmed another simple thing (I try to activate one pin via a switch, once activated another pin needs to burn a LED for a couple seconds).
    So I’ve edited the Blink_1Mhz file and saved it as Tijdschakelaar. Then “Saved as” the makefile you’ve supplied in the same folder and edited it (actually just changed Target = Blink_1Mhz to Target Tijdschakelaar). Thinking this would do all I got was: Did not find rule to make Tijdschakelaar.elf.
    What could be the problem? Probably something dead obvious.
    Greetz from Belgium.

No public wish lists :(