andres625

Member Since: July 15, 2010

Country: United States

  • Product CEL-09607 | about 3 years ago

    hi AdamW, I haven’t had much luck with the TCP/IP part. I have repeatedly asked for help in this and other forums to no avail. I’ve gotten to the part of successfully connecting to a server (socketstatus = 102). However, I’ve been unable to either send or receive info to/from the server. This is my code, you’d have to change some of the info to get it working with you sim card/server:
    http://coomevatransparente.org/arduino_code.txt

  • Product CEL-09607 | about 3 years ago

    perhaps if you post your code, someone will be able to help…

  • Product CEL-09607 | about 4 years ago

    I’m having some trouble using the TCP/IP functionality. I’ve been able to send a request to a server, but the socket closes before I can read the response. Has anyone had this problem and been able to fix it?
    This is what I’m getting:
    Socket Status: +SOCKSTATUS: 1,1,0102,0,0,0
    Sending Data:

    GET / HTTP/1.0
    OK
    +STCPD:1
    +STCPC:1
    AT+SDATAREAD=1 : +CME ERROR:21

  • Product CEL-09607 | about 4 years ago

    you shouldn’t be that selfish… could you imagine if sparkfun had said “we’ll give you the manuals, but only if …” You should give back to the community! post your code

  • Product SEN-08839 | about 4 years ago

    sorry to bother you sleekmountaincat. I’m having some trouble with this scanner. I have used arduino before, but I cannot figure out the scanner’s datasheet. I was wondering if perhaps you could post the arduino sketch you wrote to use this scanner. Thank you very much!

No public wish lists :(