Jaspal Singh

Member Since: July 16, 2010

Country: United States






  • Product SEN-10321 | about 3 years ago

    Interesting, this is very helpful. I’m actually getting readable values now, except, I’m not too sure on the units or some values seem to be the same everytime, its possible I think I might have burned out some of the sensors by using a 5V ATMEGA328 when these chips are 3.3v.
    The Logic Level Converter is required to make this work with 5V ATMEGA328 chips!

  • Product SEN-10321 | about 3 years ago

    Can someone help by posting I2C code examples for these chips, or at least one of them to work with Arduino. I can’t seem to get it right. On the Serial monitor it reads out random data but I don’t think I"m coding it properly.

  • Product SEN-10010 | about 3 years ago

    How come this board doesn’t align the x and y axis on each sensor? From the readings, you could program the micro controller accordingly, but it seems better if the X and Y were aligned.

No public wish lists :(