Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.

Member #144436

Member Since: July 29, 2010

Country: United States

  • 18 mA current!? I'm working on a very low power logger and am planning to use this logger. I wanted to check the current draw and I am seeing it settle at a fairly large 18 mA (3 times larger than the "worst case" in the datasheet. Am I missing something? I'm hooking it up with a 3.3v source and putting my multimeter between the 3.3v and Vcc. The only other pin I have connected is BLK to ground. I have an SD card in and I am getting the single blue LED flash. I've also tested it with an FTDI Basic and it seems to be working fine - just drawing more than the expected current