×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

LPG

Member Since: July 31, 2010

Country: United States

  • Take some rubber gasket strips with adhesive backing and create a gasket between each compartment by applying the strips to the lid. Align them with the divider walls. You will still have the see-through lid and will isolate each compartment so that those sneaky parts cannot migrate.

  • If you don't like the led light then simple coat the inside of the case with paint or a small piece of tape. No desoldering required! Or if you want some indication but the light is too bright then use something semi-transparent to cut down on the light output.

  • If you don't like the led indicator then simply coat the inside of the plastic case with paint or a small piece of tape. No unsoldering required. Or if you want some indication but it is too bright then used something semi-transparent to reduce the light output.

No public wish lists :(