JTuhtan

Member Since: August 5, 2010

Country: Germany

  • Product DEV-09530 | about 4 years ago

    Updated to V2.1 w/ Arduino 00118 after having the repeated 12< problem. The logger creates new files, and can be interfaced over the serial port, but the log files are always empty. Connecting to an Arduino Pro Mini 328 5V 16Hz.
    Also, the reference to how to upgrade the firmware should be taken off, I only figured out that flashing the Open Log was no longer necessary when it was discovered that there is no main.hex file anywhere to be found…
    I still hope that I can get my Open Log to work!

No public wish lists :(