Forgot your password?
No account? Register one!
August 6, 2010
Product PRT-11797 |
about 11 months ago
Once the pcDuino is in the case, you will not have access to the microSD card.
Product DEV-11712 |
The CAB-11604 OTG cable will not fit in the OTG connector of this board.
Product CAB-11604 |
This cable will not work with the OTG on the pcDuino which has a Micro B OTG connector like Olimex olinuxino WiFi.
Okay, for those who don’t have time to do an exercise for the reader, location of pin 1 for each connector as displayed on the “Getting Started…” page is as follows: GPIO lower right, SPI2 J6 upper right, and SPI0 J7 upper left.
I can’t tell from the drawings what the counting order is, but generally it is left to right top to bottom with pin i in the upper left. This results in the odd number on the left and the even numbers on the right.
The Sparkfun “Getting started with pcduino” show a GPIO and two SPI headers not listed on the pcDuino user guide, but does not give the pin-out them. Does one exist and how do we find it?
Product WRL-09111 |
about 2 years ago
Link to the schematic is broken. (404 error)
No public wish lists :(