Member #149075

Member Since: September 1, 2010

Country: United States

  • Product KIT-09485 | about 3 years ago

    Ok … Gone to see on jyetech site. Looking at picture … http://www.jyetech.com/Products/CapMeter/060_1.jpg
    R18 R17 R10 not mounted …
    Also changed R11 (because was open !?!) to 2.7 M (3.3 M, but I had nothing else). Seems now to be ok.
    Anyway, listing software might help (adding some tests before launching program).

  • Product KIT-09485 | about 3 years ago

    Finished building Cap meter kit.
    R10 not mounted as stated by GreyBadger (some two problems). Display is 3010 then runs (sometimes not)a few seconds then locks … Pushing Switch display C0 … no return or change …
    Any idea … without software listing ?

No public wish lists :(