Member #150349

Member Since: September 9, 2010

Country: United States

  • Product LCD-09105 | about 3 years ago

    I just received these little guys today that I want to use with some ninetendod ds touch screens I got on ebay. This comment thread was very helpful in informing me that the little black slidy thing needs to be moved away from the y1,x2,y2,x1 edge of the board.. I had no clue. As far as the thickness goes, I used an exacto blade to cut a piece of Scotch Magic tape the size of the connection pad on the ribbon cable and applied it to the back of the ribbon cable (other side from the connection side) .. it stuck on find and allowed the connector on the breakout board to firmly grasp the board.

No public wish lists :(