Member #157131

Member Since: October 18, 2010

Country: New Zealand

  • This board DOES work with XBee Pro and DOES do level shifting. It does level shifting on DIN in a tricky way using the diode and the XBee’s internal pullup resistors. HOWEVER, for this to work, the internal pullup on DIN needs to be enabled (disabled by default). To do this, you need an Explorer Serial or Explorer USB. In XCTU set ‘PR - Pull-up Resistor Enable’ = 0x3FFF (0x3F7F by default).
    SparkFun: You need to either add this to the product decription or change the level shifting method to work without the pull up resistor enabled

No public wish lists :(