Member #159525

Member Since: October 31, 2010

Country: United States

  • Good thing y'all are employed by and not SPRAKFUN.Com

  • For those wondering why the relay should be rotated 180 degrees, I’m assuming it’s because it provides further isolation between the LV and HV sides with little rework. The HV terminals would be closer to HV traces and the LV terminals closer to LV traces.

  • Neat put the pad securing the USB is fragile. I ripped the connector off the board this past week with one connecting leg broken off and the pour pad still attached to the other. I’ll switch to USB B mini to get the extra ruggedness.

No public wish lists :(