Member #159848

Member Since: November 2, 2010

Country: United States

  • Yes it is, though you’ll need a little space to make the turn. (about 5mm, the antenna is flexible but not very) You can also choose to desolder the antenna and put some flexible wire in between to make the turn.

    From experience I can tell you that if you ‘play’ too much with the antenna the solder connection with the board will break. Of course this is easily fixed by resoldering, but ok.

  • If used with an XBee Pro will it still be able to make a connection with another XBee Pro, or is the signal too weak for that?
    And what voltage regulators do you recommend as replacement?

No public wish lists :(