×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

Member #160138

Member Since: November 3, 2010

Country: United States

  • Product BOB-10467 | about 3 years ago

    BEWARE ! Numbering nomenclature on the printed circuit board is incorrect!
    #4 on the board should be #1, #2 on the board should be #3,
    #3 on the board should be #2, #1 on the board should be #4,
    OR … you can look at it in another way: the numbering is correct but the cathode / anode markings on the board is reversed.
    Either way ….
    Check out the polarity of the diode on the LED switch and numbering before you place it on the board and solder it!!! Other than that, this is a nice convenient board to use. I recommend it.

No public wish lists :(