Bananaflux

Member Since: November 5, 2010

Country: United States

  • Product DEV-09716 | about a year ago

    I was also having a devil of a time getting this to work with my breadboard Arduino. I ended up burning the “Arduino Nano w/ ATmega328” bootloader, FTDI TXO->pin 2, FTDI RXI-> pin 3 and FTDI DTR->Reset through a series 100nF capacitor. Mine works both with and without the pullups on TX and RX but does NOT work without the series 100nF cap.

No public wish lists :(