×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

avatar

Glyphi

Member Since: November 11, 2010

Country: United States

  • Do the individual elements have any manufacturer or part numbers on them? I can see some advantage in putting together my own modules from parts. Could make a useful clock/thermometer for my half blind mum.

  • Aha! Respect fellas, I was going to suggest more holes. The other thing that is bending my mind is how to box the thing so I can use the thumb stick and have the buttons stick above the fascia of the enclosure. i.e. suitable for a user not a hacker.
    And to be picky, extend the prototyping area to the button area, your positioning is probably generally excellent - but why constrain us when we are going to have to solder anyhow.
    Just thoughts - thanks for all you do,
    Glyn

No public wish lists :(