×
SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.
×
Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.
Australian Robotics
Member Since: November 18, 2010
Country: Australia
-
Another person interested in the class of this laser! A customer asked me this today.
-
"...and when the Forest's Spirit was destroyed, I turned to a life of crime and excess."
-
Will this work with http://www.sparkfun.com/products/465 ?
-
UPDATE: resolved
"Hi Christopher
Through my fiddling I have found that the baud rate on my dongle was set to 38400 and thus this is what was causing the problems"
ISSUE from a customer:
I recently Purchased a SEN-10537 and con not get any readable output from the
device it just comes out as garbage
I am using the following settings in hyper terminal
9600,8,none,1 with no flow control
The dongle is being connected via a usb to serial cable
IS there any know issues with the dongle ?
And what can I do to get the dongle working on my pc ? -
My entry: How to Talk To ThingSpeak With Python http://bit.ly/glol8q
-
What is the difference between the SMD and DIP version of this chip? It seems like the DIP version would be the same but easier to use for hobbyists?
No public wish lists :(