Member #163635

Member Since: November 19, 2010

Country: United States

  • Product ROB-09457 | about 3 years ago

    hey guys i can’t get this to work maybe you can help me. Im using a teensy 2.0 powered with usb bbut I’m sorta familiar with the arduino software. I know the teensy is working because I programmed the led to blink and i tested my motors(pololu 1:50). I have the standby pulled up to 5v and my motor connected to Ao1 and Ao2 and a pwm line from pin 9 on my teensy connected to PWMa. I grounded the 2 ground pins at the bottom and connected power from the usb to vcc(i also tried AA batteries). Ive played around with AIN1 and AIN2 but I’m not getting any response at all. Does anyone know why this wouldn’t work? thanks so much for any help i love spark fun.

No public wish lists :(