LuckyJack

Member Since: November 24, 2010

Country: United States

  • Product DEV-09802 | about 2 years ago

    So, I changed to chipSelect = 8 and set Pin 8 to OUTPUT (from looking at the schematic). Do I need leave pin 10 as an output also, just to keep the software happy?

    I commented out the Pin 10 assignment to Output, and so far the example program works. Are you implying that this will cause a problem at some point?

  • Product DEV-07914 | about 3 years ago

    Are these boards size compatible with the Arduino Uno? That is, do the output pins line up correctly?

No public wish lists :(