kingklanman

Member Since: November 29, 2010

Country: United States

  • Product SEN-09814 | about 3 years ago

    I have finally started communicating with my board. But, my data coming out many times is in the 65,000 range. I can have 2 axes working fine, and the 3rd is saturated (like FFF4 and other nonsensical numbers). Any thoughts? Am I reducing the data wrong?

  • Product SEN-09814 | about 3 years ago

    I have a problem communicating with the board.<br />
    <br />
    I am working w/ Windows XP. I have loaded numberous Virt com port drivers. I loaded teraterm. <br />
    <br />
    I can’t figure out how to get the board to be recognized<br />
    <br />
    What virtual com port drivers should I use (free hopefully)<br />
    <br />
    Any help is appreciated

  • Product SEN-09814 | about 3 years ago

    I got data off the board, but it looks like it is hex. I thought the units were voltage. Where am I wrong? Please help, I’m just a dumb mechanical guy

  • Product SEN-09814 | about 3 years ago

    I jsut plugged mine in and looked at the data. It looks like a combo of hex and decimal output. Any thoughts?

  • Product SEN-09814 | about 3 years ago

    I just pulled my board out and it has no reset button as advertised. Any help?

No public wish lists :(