Member Since: November 29, 2010

Country: United States

  • I spent a few days trying to fix this board that<br />
    came from sparkfun. The SD card that comes along this<br />
    board from Sparkfun WILL bootup with the user.scr settings with the following item.....<br />
    <br />
    The power supply MUST come from the DC Jack. When I measured the board it peaked at 650mA. So forget the <br />
    USB connector to power the board itself. If you do <br />
    use the USB to power the board you MAY see power cyclesinfinite reboots<br />
    <br />
    The other problem is the stock SD card Just ignore this if you are happy using user.scr. It is not formatted properly. Use ext3 ONLY for the second partition. You can download angstorm to populate your new partition. To use this partition type the<br />
    following into u-bootdon't use RAMFS to access the 2nd partition <br />
    <br />
    mmc init <br />
    run loaduimage<br />
    run mmcboot<br />
    <br />
    After this enjoy!<br />
    <br />
    to use the dvi pls look at the user.scr for the options to be entered into u-boot<br />
    <br />
    <br />

No public wish lists :(