Noobulus
Member Since: December 9, 2010
Country: United States
-
“On the other side, we have the stuff that didn’t pass quality control.” :P
-
Are these adhesive backed? If not, is there a suggested means of mounting them?
-
For when you have to solder 0 gauge wire.
-
Or perhaps SporkFun?
-
I see a space marked “climbing area” next to the breakroom… Is that what it sounds like?
-
In a purely hypothetical question, how would one go about fixing this wire if the power wires were to separate from the luminescent section?
-
In retrospect, he should not have attempted this while wearing a red shirt.
-
Is there any sort of screening/shielding that could be used to render the laser not/less harmful to human eyes while still maintaining a respectable range?
-
It worked! Thank you so much! I actually started wrong, and ended up mangling the little bumps on one side, but then the other side came up nicely. I thought the mechanism holding it in place was different. Anyways, thank you again!
P.S. The data sheet is wrong. It appears to be for a crimp connector with rows of 20 pins.
-
Hey, anyone have any experience uncrimping these?
Let’s just say a small curiosity accident occurred when they arrived.
