dyadica

Member Since: December 14, 2010

Country: United States

  • Product DEV-10999 | about 2 years ago

    ok scratch that I had one more go and have made some progress! I have now managed to reflash thr 5v board and it all works perfect however the 3v3 board returns an error of:

    avrdude: Device signature = 0x000000 avrdude: Yikes! Invalid device signature.

    looking at the error arduino detail this as either I have the wrong board selected from the Tools > Board menu or I’m not using the right version of avrdude.

    Will the bootloader supplied with the addon package cater for me reflashing the 3v3 (yes I have this selected) I assume so as the 5v worked out ok? Is there a specific bootloader for the 3v3?

    Any advice would be appreciated, d

  • Product DEV-10999 | about 2 years ago

    epic fail via arduino isp awaiting on a AVR Programmer to arrive!

  • Product DEV-10999 | about 2 years ago

    hmmm…:( I’m going to try and reflash with the bootloader included with the 19-06-12 package tomorrow, hopefully that'l work. I’ll keep you informed!

  • Product DEV-10999 | about 2 years ago

    I have the same problem with both a 5V and a 3v3 just hangs on upload same report. I have tried every combination of driver possible etc, u had any joy?

No public wish lists :(