Kevin Y.

Member Since: December 29, 2010

Country: United States

  • Product WRL-00158 | about 2 years ago

    @renechawy: The Youtube video I linked to doesn’t work for the RP-SMA version of the Bluesmirf since the reset pin is hard-tied to GND unlike the chip antenna version. You can try sending “SF,1” to the module in command mode to reset it via software.

    @kzwinn: What kind of antenna do you have on the module? Do you have any other Bluetooth devices to compare range with?

  • Product WRL-00158 | about 2 years ago

    I’ve used these to at least 400 meters with a 5dbi antenna and a Host XR with a 9dbi omni at the other end. There seems to be enough link budget in this setup for perhaps a kilometer or two depending on the type of antenna used and your environment. (In my case, it was unobstructed air a few meters above a flat lake)

    Range calculator: http://www.radiolabs.com/stations/wifi_calc.html

    Factory reset instructions: http://www.youtube.com/watch?v=PU4TMeQSvWw (not for RP-SMA version)

No public wish lists :(