Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.


Member Since: April 27, 2007

Country: United States

  • We produce a similar board - although we include a memory card as well.

    However we use an 809 for the reset interface. I'm happy to be proven wrong, but I'm reasonably sure that the WTV020 requires a reset circuit separately (which is what the 809 provides), rather than just a transistor. Despite the fact that Waytronic's dodgy schematics use a transistor symbol, in fact it's an 809 that's used on their boards, not a MMBT2222A or equivalent. The schematics in the datasheet Sparkfun have attached specify an AME8500, another "reset" or supervisory chip, whose purpose is to make sure the main device stays in reset until the power supply is stable.

    Yes, it's mono, powers a speaker directly and while the commands a slightly sluggish, you can get a fair amount of stuff on a 1Gb card.

  • Hi Calamari,
    If you have any information you can share on the touch screen protocol, I would be very appreciative.
    imharris [at] gmail.com
    kind regards

No public wish lists :(