Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.


Member Since: January 13, 2011

Country: United States

  • Hi

    I have a PCB that uses the ITG3200 and an ADXL345 and would like to change the ITG3200 by this one. First they were not available, now they are available, but there is no register description....

    Can Sparkfun help us, and post the registers documented mentioned in the datasheet?

    I would like to point out that ST electronics have a similar product and the register information is in the datasheet. But I would like to use this one because of the sensor fusion support.

  • Hi
    Something strange is happen with the TX HIGH voltage level in my module. The VCC is 3v and the high on the module TX gets 1.6v. This value is not recognized as an HIGH by MSP430 running at 3v. When using a MAX3222 it works on a terminal section because the MAX converters do a good job. After recognizing that I feed the signal again to another pair of MAX3222 ports and send to MSP. This use of MAX as a voltage converter works. But did you use the BTM182 1.8v version, or I miss something?

No public wish lists :(