Member Since: January 13, 2011

Country: United States

  • i just did all that, i used the hex file found in
    im using a OSX machine
    avrdude -P /dev/tty.usbserial-A9007RwV -b 19200 -c avrisp -p m328p -v -e -U flash:w:BootLoader328REV3_firmata.hex -U lock:w:0x0F:m
    but all i got was this:
    System wide configuration file is “/usr/local/CrossPack-AVR-20100115/etc/avrdude.conf"
    User configuration file is ”/Users/Diezc/.avrduderc"
    User configuration file does not exist or is not a regular file, skipping
    Using Port : /dev/tty.usbserial-A9007RwV
    Using Programmer : avrisp
    Overriding Baud Rate : 19200
    avrdude: stk500_getsync(): not in sync: resp=0x15
    avrdude done. Thank you.
    and i guessed it didnt work…and it didnt…..did i do anything wrong?

No public wish lists :(