lualua

• Product DEV-10008 | about 3 years ago

  Is that a mini or micro USB connector?

• Tutorial - Beginning Embedded Electronics - 9 | about 4 years ago

  Is there any harm in changing the grid to a finer resolution to get the traces to land neatly on the pads of SMD’s as long as I keep within the board house’s 8 mil spacing?

• Product DEV-09115 | about 4 years ago

  Thanks for the quick response. Do I leave the grounds isolated as well?

• Product DEV-09115 | about 4 years ago

  My micro is running on its own external power. Do I need to connect my board’s 5V/GND with the 5V/GND of the FTDI breakout? This is confusing me. I don’t want to source power from the USB.

• Product KIT-08404 | about 5 years ago

  The 0E version comes with the Atmega168 but the firmware available is for the ATmega8. Can you release an update or give some tips on what to do to update the firmware? I’m ready to test my soldering skillz!

• Product DEV-08824 | about 6 years ago

  Where can I find a SMD crystal like that? Part #???

• Product SEN-00241 | about 6 years ago

  what sort of range for detection do we stand to get with this package?

No public wish lists :(