diodepack

• Product SEN-09028 | about 3 years ago

  put together a quick video. it shows one way to test the circuit. http://www.youtube.com/watch?v=sTMkwKfbSzk

• Product DEV-08971 | about 3 years ago

  Great product! Powering this year’s controller box for West Point’s Bionic Foot. Brian Schmalz’s website is great and the board works beautifully. We’re also using the AttoPilot current/voltage sensor and Logomatic v2, both bought off of SparkFun. The PIC32 code libraries are expanding which helps quite a bit. I put a couple YouTube videos together showing how to flash the PIC (put code on the chip) and what should happen with Brian’s HelloWorld and HelloUSBWorld. Available here: http://www.youtube.com/watch?v=KOOZpQ1m0C0 and here: http://www.youtube.com/watch?v=y0d0p8xlLTI and here http://www.youtube.com/watch?v=7Jl3GNANnTQ

• Product WIG-08627 | about 3 years ago

  Great product! So easy to configure and use. Took UART data from the UBW32 (PIC32) and pumped it to the Logomatic v2 to capture diagnostic data for West Point’s Bionic Foot project! When you plug in the Logomatic v2 directly to USB, the computer will recognize the board as a USB mass storage device and you can read data dumps directly without a card reader.

No public wish lists :(