Eric27

Member Since: February 3, 2011

Country: United States

  • Product COM-09806 | about 3 years ago

    It fits in a breadboard, but it’s not quite “friendly”. The friction of turning the knob is almost as much as the flex strength of the leads coming out the bottom. Turning the pot in a breadboard requires two hands to avoid damaging the leads. I haven’t broken a lead off yet, but they got pretty bent up before I figured this out.
    Still, can’t beat the price for those infrequently-tweaked settings.

  • Product PRT-09567 | about 3 years ago

    Meh. I got this to go with the “Arduino and Breadboard Holder”. It works okay for that, but some of the connections are really tight.
    Also, the power rows are staggered from the regular rows, so you can’t use this with a Bare Bones Board.

  • Product KIT-10003 | about 3 years ago

    I have the same problem with my kit :( Only one 3.3V regulator, and only one trimpot. I have not checked the capacitors yet.

No public wish lists :(