Member #200788

Member Since: February 5, 2011

Country: United States

  • Product PRT-10540 | about 3 years ago

    I have figured out how to get the nut and bolt to work.
    By putting a lock washer under the nut, the bolt is held in a bind.
    You now can tighten the nut.
    The lock washers should be included in the kit.
    Frank G. Haymes

  • Product PRT-10540 | about 3 years ago

    I Just received my Makerbeam kit.
    I have a problem with the bolts. There is no way to tighten up the nut and bolt. The bolt should be some type of T-head so they will not rotate when you are trying to tighten them.
    I can not recomend the Makerbeam kit until the bolts are fix.
    Frank G. Haymes

No public wish lists :(