Member Since: February 8, 2011
Country: United States
Product BOB-11611 about 4 years ago
Hi, I have been testing the L6470 with a NEMA 17 and 23 motor. I got the NEMA 17 to work by entering the Ke , mH and the ohms in the BEMF tool I found. Once I got the 17 working fine I started working on the NEMA 23. I tried the 23 valves in the BEMF tool and it will not go over 600steps/s. The NEMA 23 is a 8 wire parallel bipolar motor, is there anyway this could be causing a problem? Just as a test, I disconnected the coils in parallel. I only had 4 wires hooked up and it worked fine.
Any ideas?
Product DEV-12640 about 6 years ago
Thank you
Product DEV-12640 about 6 years ago
Hi, can someone tell me the distance between the two rows of holes?
News - December Caption Contest about 6 years ago
The three dorketeers
Product COM-09203 about 8 years ago
I had nothing but trouble with my sequencer. I also was using the 3.3 inverter. I never could get it to work with the sequencer. The inverter work fine when it was not hooked up to the sequencer.
Product DEV-10748 about 8 years ago
Has anyone got it to work with the Samsung Captivate for AT&T?
No public wish lists :(
Forgot your password?
No account? Register one!