Member #202346

Member Since: February 10, 2011

Country: United States

  • When I received my SerLcd, I could only print to the first column of the two rows of my 16x2 serlcd using the normal Serial.print(“Hello”). Only the “o” would show up.
    I had to use the following function to set the width to the proper setting:
    void configureLcd(){
    LCD.print(0x7C, BYTE); //command flag for backlight stuff
    LCD.print(0x04, BYTE); //16 chars wide (i.e. 16x2)
    The correct value you need to send may differ based on how many columns you have on your device. See the data sheet for the exact value.

No public wish lists :(